Active Brake II - JeffTron

Product: Active Brake II - JeffTron Product description: The Active Brake II from JeffTron is a professionally designed MOSFET with active motor braking function, optimized for use in airsoft electric guns. This system ensures that the piston is not partially extended when firing in semi mode, minimizing wear on the spring and internal parts while ensuring effective chamber locking by the nozzle. For high-rate-of-fire weapons, the active brake solves the problem of multiple shots in semi mode. The device increases the rate of fire of the weapon and extends battery life compared to the original wiring. Specifications: - Standalone device without cables; the recommended maximum cable cross-section for the power circuit is 1.5 mm² and for the signal circuit 0.5 mm². - Suitable for service centers; if you are unsure about soldering wires to the board, we recommend the version with wiring and accessories. - Designed for springs up to M210, which corresponds to a current of 150A for a single shot or 50A for burst fire for a maximum of 30 seconds. - Compatible with all commonly used batteries up to 17 V (Ni-xx 8.4 - 12V, LiPo 7.4 - 14.8V). - After opening the contacts, it uses the excess energy of the motor to stop it; the braking effect is strongest with a load motor with neodymium magnets. - 6-wire connection. - Device dimensions: 35x13x7 mm. - Trigger contacts do not burn. - The device does not consume any current when idle. - In AUTO mode, the piston stops in a random position, which is determined by the principle of the AEG weapon mechanism. - For proper operation, it is necessary to have a functional interrupter, switch mechanism, reverse latch, trigger, and trigger stop in the gearbox, just like in a standard gearbox.